Welcome to Jining Xunda Pipe Coating Materials Co.,Ltd.

Jining Xunda Pipe Coating Materials Co.,Ltd

中文    丨    English

PRODUCT CENTER

Position:
Homepage
/
/
Heat shrinkable sleeves
Product name

heat shrinkable sleeves

The pipeline heat shrink coating system designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. It consists low pre-heat modified bitumen sealant adhesive and thick-wall irradiated cross linked polyolefin.
Product name

Heat shrinkable sleeves

The pipeline heat shrink coating system designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. It consists low pre-heat modified bitumen sealant adhesive and thick-wall irradiated cross linked polyolefin.   When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
Product name

Heat shrink wraparound sleeves

Heat shrinkable wraparound sleeves XHWS ,Two-piece, with separate closures designed for the corrosion protection. XHWS is superior performance heat shrinkable products designed for corrosion protection on field applied girth-weld joints of buried and exposed steel pipelines operating up to 80°C (176°F).
Product name

Heat shrink tubular sleeves

Heat Shrinkable Tubular Sleeves (XHTS) consist of a cross-linked polyolefin backing,  coated with an adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy. Tubular type sleeves are installed before joining the pipe ends by sliding the coat from a free end of the pipe onto the area to be coated. It is designed for corrosion protection of flanges, casings, bell and spigot joints and other high profile couplings.
Product name

3LPP Heat-Shrinkable wraparound Sleeve

JNHT-140 3LPP heat shrink sleeves
Product name

Epoxy primer for heat shrinkable sleeves

POXY PRIMER is a specially formulated 100% volume solids (solventless) two component epoxy. Typically used in a 3 layer coating system for superior corrosion protection of field welded joints of steel pipes or as an overcoat in multi-layer sleeve systems, this product provides the assurance that the pipe is fully protected and it will not be displaced and exposed to corrosive contaminants during the aligning & shrinking stages of the sleeve installation.
Product name

Closure patch for wraparound HSS

Product name

 Pipeline Repair patch for HSS

 Pipeline Repair patch is made of cross-linked polyolefin sheet coated with high performance heat melting adhesive. Coating Repair patch are used to add corrosion protection or fill voids in damaged coatings.
Product name

Repair Patch &Stick

Repair Stick is designed for repair of damaged PE-coating on steel pipe and the amendment of the holes damage,repair Patch is designed for repair of damaged PE-coating on steel pipe and the amendment of the crack, which the diameter smaller than 150mm on the backing layer of Heat Shrinkable Tape/Sleeve. Heat Shrinkable Wraparound Sleeve is recommended if the diameter larger than 150mm.

Previous page
1
2

CONTACT US

Add : N0.1, Jibei High-tech Industrial Park,Jining272000,Shandong,China

Jining Xunda Pipe Coating Materials Co.,Ltd

WeChat Follow

Copyright : Jining Xunda Pipe Coating Materials Co.,Ltd     鲁ICP备16051499号       Powerby :   300.cn    jinan