Welcome to Jining Xunda Pipe Coating Materials Co.,Ltd.
Tel:+86 537-2611133 Phone:+86 15910006277
Copyright ©:Jining Xunda Pipe Coating Materials Co.,Ltd . ICP: 09059627 by: www.300.cn
Keywords
anticorrosion tape, alta alten tape, OIl gas pipe wrapping tape, petro tape, bitumen tape, polyethylene butyl rubber tape, Aluminum waterproof tape,
jining xunda corrosion protection tape manufacture,
Connect: Daisy
TEL: +86 537-2611133
FAX: +86 537 2299111
Phone: +86 15910006277
Email: sales@shandongxunda.com
Skype: pipeline.tape
Whatapp: +86 15265879789
QQ:124799027
Add:NO.1, Jibei High-tech Industrial Park,Jining City,Shandong Province,China
PRODUCTS
pipe wrapping outer tape
pipe wrapping outer tape
XUNDA-T-100&200 Pipe wrap coating tape
System description
Xunda anti-corrosion tape T100, mechanical protection tape T200 is a multi-layer system used for the corrosion protection of oil ,gas ,and water underground or above-ground steel pipeline.
Tape Inner Wrap
The inner wrap tape tape shall be two ply plastic tape consisting of stabilized polyethylene (PE) base of outer layer (backing) with a layer of butyl rubber (adhesive) applied on one side.
The inner wrap tape must be compatible with the properties of the primer and the properties of outer wrap tape.
PE backing color shall be black.
Tape Outer Wrap
The Outer Wrap Tape shall be two-ply plastic tape consisting of stabilized polyethylene base of outer layer (backing) with a layer of butyl rubber (adhesive) applied on one side.
PE backing colour shall be White.
System Features
Resistant to soil stress |
Cold applied over a wide temperature range. |
Consistent uniform thickness. |
Cold applied without special equipment. |
Compatible with common pipe coatings |
Excellent resistance to cathodic disbondment. |
Long term in-ground performance |
Excellent adhesion to primed pipe and itself. |
Meets ASTM D 1000 、EN 12068、AWWA C214、C209 、DIN 30672 and related |
System Properties
Anti-corrosion Tape T100 |
Mechanical Protection Tape T200 |
||||||||
|
T138 |
T150 |
T165 |
T175 |
T238 |
T250 |
T265 |
T275 |
|
Backing |
0.15mm |
0.25mm |
0.25mm |
0.35mm |
0.25mm |
0.38mm |
0.50mm |
0.64mm |
|
Adhesive |
0.15mm |
0.25mm |
0.39mm |
0.41m |
0.13mm |
0.12mm |
0.14mm |
0.12mm |
|
Tape thickness |
0.38mm 0.508mm 0.635mm 0.75mm(15mil,20mil,25mil,30mil) |
||||||||
Width |
50mm 100mm 150mm 300mm (2’’,3’’ 4’’,6’’,9’’,12’’) or others |
||||||||
Length |
30m 60m 120m 180m (100ft,200ft,400ft,800ft) or others |
||||||||
Color |
Black , Yellow ,White or others |
Product properties |
Test method |
Typical Value |
Typical Vale |
|
|
T165 |
T265 |
Tensile Strength |
ASTM D1000 |
52N/cm |
90N/cm |
Elongation |
ASTM D1000 |
>300% |
>400% |
Peel Adhesion to Primed Steel |
ASTM D1000 |
30N/cm |
|
Cathodic Disbondment |
ASTM G8 |
6.4mm |
|
Water Vapor Transmission Rate |
ASTM F1249 |
0.2g/m2 |
|
Water Absorptivity |
ASTM D570 |
0.02% |
|
Volume Resistivity |
ASTM D257 |
2.5 X 1015 ohm·cm |
|
Dielectric Strength |
ASTM D149 |
40 KV |
|
Impact Resistance |
ASTM G-14 |
5.5Nm |
|
penetration resistance |
ASTM G-17 |
<15% |
|
Temperature Range |
|
5℃ -50℃ |