Welcome to Jining Xunda Pipe Coating Materials Co.,Ltd.

Jining Xunda Pipe Coating Materials Co.,Ltd

中文    丨    English

Peel test for pipeline anti corrosion tape

  • Categories:Company News
  • Author:XUNDA DAISY
  • Origin:
  • Time of issue:2021-05-08 13:53
  • Views:

(Summary description)Peel strength(Peel adhesion strength,Bond test, Peel test ). In our standard SY/T0414-07, the peel strength measurements were carried out using the following methods:

Peel test for pipeline anti corrosion tape

(Summary description)Peel strength(Peel adhesion strength,Bond test, Peel test ).

In our standard SY/T0414-07, the peel strength measurements were carried out using the following methods:

  • Categories:Company News
  • Author:XUNDA DAISY
  • Origin:
  • Time of issue:2021-05-08 13:53
  • Views:
Information

Peel strength(Peel adhesion strength,Bond test, Peel test )

In our standard SY/T0414-07, the peel strength measurements were carried out using the following methods:

When testing,using a knife to cut open along the ring 10 mm in width, length greater than 100 mm layer of tape until the tube. With a spring balance and a 90 degree angle from the wall opened, opened speed is not greater than 300mm/min, the tests should be carried out after 24 hours.

 

As shown below: We can also according to the U.S. ASTM1000 standards, 3kg copper weights hanging method test method to check for: the vertical sides

of the pipe coating cut open a wide 5cm, 10cm long tape layer 180 degrees overhanging 3kg weight at 10 min decreased from 

less than 10cm is qualified,and such tape is in general fall within 10 minutes are less than the distance 3cm, the above test time and should be at room temperature (5-20 ℃),

humidity is less than 75% after 24 hours when finished.

Keyword:

CONTACT US

Add : N0.1, Jibei High-tech Industrial Park,Jining272000,Shandong,China

Jining Xunda Pipe Coating Materials Co.,Ltd

WeChat Follow

Copyright : Jining Xunda Pipe Coating Materials Co.,Ltd     鲁ICP备16051499号       Powerby :   300.cn    jinan